Corsair DOMINATOR PLATINUM RGB 32GB (2x16GB) DDR5-5600 CL36
A 32 GB (2 x 16 GB) DDR5-5600 CL36 kit with 12 individually addressable RGB LEDs per module, DHX cooling, onboard voltage regulation and Intel XMP support.

Full Specification Sheet
| Type | DDR5 UDIMM |
|---|---|
| Capacity | 32 GB (2 x 16 GB) |
| Tested Speed / Latency | 5600 MT/s, CL36 |
| Rating | PC5-44800 (DDR5-5600) |
| Tested Voltage | 1.25 V |
| SPD (Default) | 4800 MHz, CL40, 1.1 V |
| Profile | Intel XMP |
| PMIC | OC PMIC (onboard voltage regulation) |
| Lighting | 12 individually addressable CAPELLIX RGB LEDs |
| Cooling | Aluminum heat spreader with DHX cooling |
| Compatibility | Intel 600, 700 and 800 Series |
| Warranty | Limited lifetime |
The Corsair DOMINATOR PLATINUM RGB 32GB (2 x 16GB) DDR5 5600 MT/s C36 kit is a pair of 16 GB DDR5 modules from the company's flagship DOMINATOR line, sold together for dual-channel use. The series is known for its sculpted aluminum heat spreaders and for a strip of individually addressable lighting along the top of every module. This particular kit is the black version at DDR5-5600 with a CAS latency of 36, and it is built for Intel platforms. Corsair positions DDR5 as the memory that keeps a modern multi-core processor supplied with data, and the DOMINATOR line as the place where speed, cooling and appearance are pushed furthest. This page collects the published specification, explains what each term means and marks clearly what comes from the manufacturer's product page.
Capacity, speed and timings
The kit contains two 16 GB modules, for a total of 32 GB. Corsair lists the tested speed as 5600 MT/s and the tested latency as 36, meaning CAS latency 36 (CL36). The speed rating is PC5-44800, which is the DDR5-5600 class, and the page's headline mentions speeds over 5000 MHz. The tested voltage is 1.25 V. The SPD, which is the small chip on each module that stores default settings read by the motherboard at start-up, holds much more conservative values: 4800 MHz, a latency of 40 and 1.1 V. In plain terms, the kit boots at the standard DDR5-4800 speed and reaches its advertised 5600 MT/s CL36 profile only when that profile is enabled in the motherboard firmware. Our explanation of RAM speed versus latency shows why both numbers matter, and a rule of thumb converts them: first-word latency in nanoseconds is the CAS latency times 2000 divided by the transfer rate, which gives about 12.9 nanoseconds for CL36 at 5600 MT/s.
DDR5 and the on-module regulator
The product specification lists an OC PMIC, and Corsair's text describes onboard voltage regulation with software control. DDR5 moved voltage regulation from the motherboard onto the memory module itself, through a power-management IC, and the OC variant is intended to allow finer control for overclocking. Corsair says this built-in regulation, together with control through its iCUE software, provides a more stable overclock than before and gives you the power and the control. If you are moving from an older platform, our guide to DDR5 versus DDR4 explains the wider changes, from lower default voltage to the split of each module into two channels, in plain terms.
XMP profiles and iCUE
The kit carries an Intel XMP performance profile. XMP stores a tested combination of speed, timings and voltage in the module so that a single BIOS option applies it. Corsair also highlights custom XMP 3.0 profiles: through iCUE you can save your own profiles rather than adjusting settings manually each time, and tailor them by application or task. The compatibility list on the page names Intel 600 Series, 700 Series and 800 Series platforms, which is a statement of where the profile is meant to be used. Buyers on AMD platforms should read our explanation of XMP versus EXPO memory profiles before choosing, because the profile format is a genuine selection criterion.
Lighting
Each module is lined with twelve individually addressable CAPELLIX RGB LEDs, which Corsair describes as ultra-bright and low in power consumption. iCUE lets you choose from dozens of preset lighting profiles or create your own, and the page names presets such as Color Pulse, Color Shift, Color Wave, Rain, Rainbow, Rainbow Wave, Spiral Rainbow, Visor and Watercolor. A downloadable RGB memory plugin for ASUS Aura Sync is listed on the page as well, which is helpful for builders who control their lighting through the motherboard vendor's software. The lighting is optional in the sense that it can be set to a single static colour or switched off from software, but there is no way to remove the LED strip itself, so if you want plain memory you should look at a different series.
Cooling and construction
Corsair's patented DHX cooling is described as cooling the memory through both the memory chips and the ground plane of the circuit board, using a dedicated heat spreader, to sustain high performance under extreme loads. The heat spreaders are made of precision-forged aluminum with die-casting and anodization, and the modules use a custom high-performance PCB that the manufacturer says guarantees signal quality and stability for superior overclocking. The chips are described as hand-sorted and tightly screened to ensure consistent high-frequency performance with aggressive timing options. These are manufacturer's claims about process and design, not results we have measured. No fan is included with the kit, and the heat spreader is the aluminum type. Before buying, check the clearance under large air coolers, as with any memory that carries a full-length heat spreader and lighting strip.
Compatibility and installation
The modules are unbuffered UDIMMs for standard desktop motherboards, and Corsair lists them as optimised for the latest generation of DDR5-compatible Intel boards. Installation is the usual procedure: with the computer off and unplugged, open the clips, align the notch, press until both clips close, and use the slot pair the motherboard manual names for dual-channel operation. After the first boot, enable the XMP profile in the BIOS so that the kit runs at its rated speed, and update the BIOS if the board does not recognise the profile. Corsair's own download list includes the iCUE software with an XMP manager preview, which is the route to the custom profiles mentioned above.
Who the kit is for
The combination of a 5600 MT/s rating, a full-length lighting strip and Corsair's software integration makes this kit a fit for builders who want a visible, synchronised memory upgrade on a current Intel platform more than for those chasing the highest possible transfer rate. A capacity of 32 GB in two modules is a practical amount for gaming, content creation and heavy multitasking, and the two-module layout leaves the other two slots of a four-slot board free for a later change. Because the compatibility list is limited to Intel 600, 700 and 800 Series platforms, an owner of a different platform should confirm support with the board manufacturer before ordering. Whichever platform you use, remember that the rated figures apply only with the profile enabled, and that real-world results depend on the processor's memory controller, the motherboard and the BIOS version.
Warranty and positioning
The kit is covered by a limited lifetime warranty, which the manufacturer describes as complete peace of mind and years of worry-free performance; the exact terms are on Corsair's site. Among the products on this site, the closest comparisons are the DOMINATOR PLATINUM RGB versus VENGEANCE DDR5 comparison, which trades lighting for a higher rated speed, and the DOMINATOR TITANIUM RGB 64GB kit from the same family. You can also browse the full memory category. The product page states no price, so confirm price and stock with a retailer. None of the statements above is a test result; all values are the manufacturer's.
Product image: Corsair product image.


